Menu
Previous
Wood
Next
Wood

Silver

Silver

There will a slight contrast between different products that have the same finish, since we apply different coatings on each product depending on its requirements of use.

Due to the limitations of screen-viewing, the finish shown on this website is merely an approximation of its real color. For this reason, before placing any order, we recommend requesting actual samples of the product.

ProductsSurface
Characteristic		Dimensions
(mm)		Thicknesses
(mm)		PropertiesApplication 
Facade Smooth Smooth:
The Smooth finish reveals the simple, natural richness of the veneer, distinguishing variations in the tone of each wood species. 		2440 x 12206
8
10
12
14
18
20
22
No Maintenance No Maintenance:
The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Reaction to Fire Reaction to Fire:
 Ventilated Facade Ventilated Facade:
Permeability, water protection, thermal insulation, solar and acoustic protection.
Facades

Natural wood for exterior cladding
Suitable for extreme climate changes
Ventilated facade, louvres, overlapping slats, suspended ceilings, curved walls…

Request sample
Wet Internal Smooth Smooth:
The Smooth finish reveals the simple, natural richness of the veneer, distinguishing variations in the tone of each wood species. 		2440 x 1220
6
8
10
12
14
18
22
No Maintenance No Maintenance:
The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Antibacterial Surface Antibacterial Surface:
The whole Walls and Ceilings range of products can be supplied with an antibacterial surface (tested in accordance with ISO 22196:2007) upon request. Reaction to Fire Reaction to Fire:
Lightfastness Lightfastness:
The whole Walls and Ceilings range of products has obtained Grade ≥2 in grey scale rating according to EN 438-2 Part 27 regulation. Scratch Resistance – Grade 3 Scratch Resistance – Grade 3:
The whole Walls and Ceilings range of products has obtained Grade 3 in scratch resistance tests according to EN 438-2 Part 25 regulation.
Walls and Ceilings

Natural wood interior cladding for wet zones
High traffic areas
Bathrooms, gyms, saunas, swimming pools, porches…

Request sample
Wet Internal Chequer Plate Chequer Plate:
Chequer Plate is a finish with a regular pattern of raised diamonds. Exclusive for Wet Internal. 		2440 x 1220
6
8
10
12
14
18
22
No Maintenance No Maintenance:
The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Antibacterial Surface Antibacterial Surface:
The whole Walls and Ceilings range of products can be supplied with an antibacterial surface (tested in accordance with ISO 22196:2007) upon request. Reaction to Fire Reaction to Fire:
Lightfastness Lightfastness:
The whole Walls and Ceilings range of products has obtained Grade ≥2 in grey scale rating according to EN 438-2 Part 27 regulation. Scratch Resistance – Grade 3 Scratch Resistance – Grade 3:
The whole Walls and Ceilings range of products has obtained Grade 3 in scratch resistance tests according to EN 438-2 Part 25 regulation.
Walls and Ceilings

Natural wood interior cladding for wet zones
High traffic areas
Bathrooms, gyms, saunas, swimming pools, porches…

Request sample
Skin External Skin External: Smooth Skin External: Smooth:
The Smooth finish reveals the simple, natural richness of the veneer, distinguishing variations in the tone of each wood species. 		2440 x 1220
2700 x 1220		2
No Maintenance No Maintenance:
The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Curved Panels Curved Panels:
Skin Internal can be curved to a maximum radius of 25 cm, allowing its application on curved corners or columns. Resistant to Changes Resistant to Changes:
Extremely resistant to atmospheric changes in humidity and temperature.
Skin

Natural wood skin for exteriors
Curved surfaces (radius of up to 2 m)
Covering of walls, columns, garage doors, external doors, letterboxes, fences…

Request sample
Request sample
Back to Woods
Back
Close

Sample added

Thank you for selecting a sample. The standard measurements for samples are 210 x 297 mm. Should you require a sample of other characteristics, please contact us.

Should you require more than 3 samples, please contact us.

Close

Thank you for selecting the Silver sample. You can request it applied to the product you preffer.

Submit
✕

Newsletter

If you want to keep up-to-date with our news, you can sign up for our newsletter.