Onix Finish – Parklex

There will a slight contrast between different products that have the same finish, since we apply different coatings on each product depending on its requirements of use.

Due to the limitations of screen-viewing, the finish shown on this website is merely an approximation of its real color. For this reason, before placing any order, we recommend requesting actual samples of the product.

Products	Surface Characteristic	Dimensions (mm)	Thicknesses (mm)	Properties	Application
Facade	:	2440 x 1220	6 8 10 12 14 18 20 22	No Maintenance: The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Reaction to Fire: Ventilated Facade: Permeability, water protection, thermal insulation, solar and acoustic protection.	Facades Natural wood for exterior cladding Suitable for extreme climate changes Ventilated facade, louvres, overlapping slats, suspended ceilings, curved walls…	Request sample
Dry Internal	Woodskin Woodskin: The Woodskin surface provides a slight satin appearance, providing the physical sensation of the grain and knots in the original wood veneer.	2440 x 1220	8 11 14 17 20 26	No Maintenance: The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Antibacterial Surface: The whole Walls and Ceilings range of products can be supplied with an antibacterial surface (tested in accordance with ISO 22196:2007) upon request. Reaction to Fire: Lightfastness: The whole Walls and Ceilings range of products has obtained Grade ≥2 in grey scale rating according to EN 438-2 Part 27 regulation. Scratch Resistance – Grade 3: The whole Walls and Ceilings range of products has obtained Grade 3 in scratch resistance tests according to EN 438-2 Part 25 regulation.	Walls and Ceilings Natural wood interior cladding for dry zones High traffic areas Museums, offices, hotels, institutions…	Request sample
Wet Internal	:	2440 x 1220	6 8 10 12 14 18 22	No Maintenance: The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Antibacterial Surface: The whole Walls and Ceilings range of products can be supplied with an antibacterial surface (tested in accordance with ISO 22196:2007) upon request. Reaction to Fire: Lightfastness: The whole Walls and Ceilings range of products has obtained Grade ≥2 in grey scale rating according to EN 438-2 Part 27 regulation. Scratch Resistance – Grade 3: The whole Walls and Ceilings range of products has obtained Grade 3 in scratch resistance tests according to EN 438-2 Part 25 regulation.	Walls and Ceilings Natural wood interior cladding for wet zones High traffic areas Bathrooms, gyms, saunas, swimming pools, porches…	Request sample
Wet Internal	:	2440 x 1220	6 8 10 12 14 18 22	No Maintenance: The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Antibacterial Surface: The whole Walls and Ceilings range of products can be supplied with an antibacterial surface (tested in accordance with ISO 22196:2007) upon request. Reaction to Fire: Lightfastness: The whole Walls and Ceilings range of products has obtained Grade ≥2 in grey scale rating according to EN 438-2 Part 27 regulation. Scratch Resistance – Grade 3: The whole Walls and Ceilings range of products has obtained Grade 3 in scratch resistance tests according to EN 438-2 Part 25 regulation.	Walls and Ceilings Natural wood interior cladding for wet zones High traffic areas Bathrooms, gyms, saunas, swimming pools, porches…	Request sample
Acoustic	Woodskin Woodskin: The Woodskin surface provides a slight satin appearance, providing the physical sensation of the grain and knots in the original wood veneer.	2440 x 1220	12 18	No Maintenance: The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Antibacterial Surface: The whole Walls and Ceilings range of products can be supplied with an antibacterial surface (tested in accordance with ISO 22196:2007) upon request. Reaction to Fire: Acoustic Absorption: The results of reverberation chamber tests conducted for the measurement of sound absorption obtained balanced results between 0.2 and 0.6 depending on the perforation performed. Lightfastness: The whole Walls and Ceilings range of products has obtained Grade ≥2 in grey scale rating according to EN 438-2 Part 27 regulation. Scratch Resistance – Grade 3: The whole Walls and Ceilings range of products has obtained Grade 3 in scratch resistance tests according to EN 438-2 Part 25 regulation.	Walls and Ceilings Natural wood interior cladding for a special sonority High traffic areas that require a specific level of sound absorption Conference rooms, auditoriums, classrooms, theatres…	Request sample
Hy Tek	:	2450 x 590 2450 x 290 2450 x 188	14	Moisture Resistance: The moisture resistant surface, applicable to all finishes and woods, allows Hy Tek to be installed in areas subject to frequent contact with water. Class 23: Intense – Residential use: Rating obtained according to performance specifications established by the UNE EN 13329 regulation upon Residential use. They are therefore the most effective solution for high-traffic residential areas. Class 32: General – Commercial Use: Rating obtained according to performance specifications established by the UNE EN 13329 regulation upon Commercial use. They are therefore an effective solution for high-traffic commercial areas. No Maintenance: The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Bevelled Edges: Hy Tek flooring can be supplied with bevelled edges. This new aesthetic virtue can be applied to both the longitudinal and transversal edge of the slats. Slip Resistance: Scratch Resistance – Grade 4: Hy Tek has obtained Grade 4 in scratch resistance tests according to the UNE EN 13329 regulation. Wear Resistance: Having obtained AC6 classification, Hy Tek reaches the highest level of wear resistance according to the EN 438-2 Sect.11 regulation.	Floors Floors for interiors Extreme traffic environments Museums, ballrooms, conference rooms, offices, hotels…	Request sample
Skin External	:	2440 x 1220 2700 x 1220	2	No Maintenance: The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Curved Panels: Skin Internal can be curved to a maximum radius of 25 cm, allowing its application on curved corners or columns. Resistant to Changes: Extremely resistant to atmospheric changes in humidity and temperature.	Skin Natural wood skin for exteriors Curved surfaces (radius of up to 2 m) Covering of walls, columns, garage doors, external doors, letterboxes, fences…	Request sample
Skin Internal	Woodskin Woodskin: The Woodskin surface provides a slight satin appearance, providing the physical sensation of the grain and knots in the original wood veneer.	2440 x 1220	1	No Maintenance: The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Curved Panels: Skin Internal can be curved to a maximum radius of 25 cm, allowing its application on curved corners or columns. Resistant to Changes: Extremely resistant to atmospheric changes in humidity and temperature.	Skin Natural wood skin for interiors Curved surfaces (radius of up to 25 cm) Covering of curved corners, columns, doors, furniture…	Request sample
Skin Floor	:	610 x 610 2440 x 1220 2700 x 1220	1	No Maintenance: The surface composition of Parklex products protects against adverse weather conditions, eliminating the need for any maintenance or treatment. Curved Panels: Skin Internal can be curved to a maximum radius of 25 cm, allowing its application on curved corners or columns. Wear Resistance: Having obtained AC6 classification, Hy Tek reaches the highest level of wear resistance according to the EN 438-2 Sect.11 regulation.	Skin Natural wood skin for interiors Raised flooring Covering of tiles	Request sample